Stainless Steel Pens
     
 
 

 

Detectable Mallet with Screw-in Replacement Faces

 

BACK TO MAIN MENU


 

Food Safe Detectable Hammer

Food Safe Detectable Hammer

 

 

 

Type

Code

Detectable Hammer 38mm (1 1/2")
with two detectable screw-in faces
810-S693-P01
50mm Diameter Detectable Hammer / Mallet - Blue Colour 810-S062-P01

 

 

 

 

Disclaimer: Detectamet recommend all products be tested in your environment to ascertain suitability. Information is supplied in good faith without warranty

 

Detectable Plastic Hammers & Mallets Manufactured in Great Britain, this heavy weight mallet is designed to offer a heavier hitting force using metal detectable nylon caps, which are designed to wear and be replaced by hand.

 

The caps are one piece injection moulded and do not contain any metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent the caps working loose and also feature a shoulder for extra strength and to prevent fracture from misdirected blows.

 

* Made in the UK to high quality standards
* Wearable, replaceable detectable caps
* 38mm / 1 1/2" cap diameter
* 650g / 1.4Lbs overall weight
* 305mm / 12" overall length
* Reduced risk of contamination caused by loose or broken caps
* Ideal as a multipurpose striking tool in most light assembly and engineering applications

 

Detectable Replacement Caps These caps are one piece injection moulded and do not contain any metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent the caps working loose and also feature a shoulder for extra strength and to prevent fracture from misdirected blows.

 

* Suitable for the Heavy Duty Mallet only
* 38mm / 1 1/2" cap diameter

 

Please contact our Sales Office on Tel +44 (0)1759 304200 or email sales@us.detectamet.com for further information.

 

SOME RULES FOR HAMMER SAFETY

 

ALWAYS wear safety goggles when using striking tools to protect the eyes from dust and particles.

 

ALWAYS inspect the hammer before beginning the task to be sure it is not damaged and that all parts are secure.
Be certain that replaceable faces are fitted securely into the head.
On split-head hammers, be sure that the socket head cap screws are periodically retightened, as necessary.

 

NEVER use a hammer with a spit or damaged handle. The practice of taping a cracked handle is dangerous and can result in injury to the user as well as nearby personnel.

 

ALWAYS replace striking faces before they wear down far enough to allow the body of the hammer head to contact the work surface.

 

NEVER use a hammer with a loose handle. Loose handles should be replaced or fitted with new wedges of the proper size. Replacement handles should be the same length and quality as the original.

visit our detectable products online shop

 

ENQUIRE ABOUT THIS PRODUCT