Detectable Rubber Extrusions

Metal Detectable Silicone Rubber Extrusions for Seals & Gaskets

      BACK/FORWARD        
 

BACK TO MAIN MENU


 

 

 

 

Detectamet Metal Detectable Silicone Rubber Extrusion With High Heat Stabilisers 75 shore DTMHST 0603

Type

Code

45-75 Shore Hardness Available On Rubber Sheeting & Extrusion  
Silicone Rubber Extrusion With Heat Stabilisers 45 shore

DTMHST 0602

 

Detectamet are able to supply the following adhesive

to use with metal detectable silicone products (also available in 18kg pails and 204kg drums)

 

Type

Code

Detectamet Silicone Glue (82.8ml Tube)

DTM 0610

Detectamet Silicone Glue (310ml Tube)

 DTM 0611

 

 

Disclaimer: Detectamet recommend all products be tested in your environment to ascertain suitability. Information is supplied in good faith without warranty

Food Safe Detectable Silicone Rubber Extrusions. Detectamet are able to offer a metal detectable rubber silicone extrusion for general purpose compound having good mechanical properties. Features include good heat stability inside temperature range, supplied in specific colour; blue. The popular use of this product is found in Food and Dairy, Bakery, Beverage, Pharmaceutical and OE Markets.

 

DTMHST 0602
A metal detectable general purpose compound having good mechanical properties. Features include good heat stability inside temperature range, supplied in specific colour; blue.
The silicone constituents in this compound conform to FDA regulations.

  • Shore hardness;    45 +/- 5
  • Elongation at break;    600 %
  • Tensile strength;    8.0 MPA
  • Tear strength;    15 KN/M
  • Specific gravity;     1.2
  • Temp range;    -70C to +200C
  • Compression set;    36%

A metal detectable general purpose compound having good mechanical properties. Features include good heat stability inside temperature range, supplied in specific colour; blue.
All the constituents in this compound conform to FDA regulation 21 CFR 177.2600.

  • Shore hardness;    75 +/- 5
  • Elongation at break;    320 %
  • Tensile strength;    8.0 MPA
  • Tear strength;    12 KN/M
  • Specific gravity;     1.22
  • Temp range;    -70C to +200C
  • Compression set;    32%

 

 

Colours

 
Blue
 
Black

Further information:

Data sheets available upon request.

 

ENQUIRE ABOUT THIS PRODUCT

 
       

       
 
   
   
   

Copyright

Copyright 2009 ECC Ltd    All rights reserved