Detectable Rubber Sheeting

      BACK/FORWARD        
 

BACK TO MAIN MENU


 

 

This test was conducted in a “neutral” environment and test results will vary in different factory environments.

 

Property

Typical Values

Test Method

Colour Black / Blue RAL 5004
Hardness 67° Shore 'A' ASTM D2240
Tensile Strength 9.0 MPa BSISO 37
Elongation to Failure 400% BSISO 37
Tear Strength 13.5 N/mm BSISO 34-1 method C
Temperature Range -60° C to 200° C  

 

 

Type

Code

Detectamet Silicone Rubber Sheet Black 1.5mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)

815-S148-P02

Detectamet Silicone Rubber Sheet Blue 1.5mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)

815-S148-P01

Detectamet Silicone Rubber Sheet Black 3.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)

815-S150-P02

Detectamet Silicone Rubber Sheet Blue 3.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)

815-S150-P01

Detectamet Silicone Rubber Sheet Black 6.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)

815-S152-P02

Detectamet Silicone Rubber Sheet Blue 6.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)

815-S152-P01

Silicone Rubber Sheeting 1200mm Wide 4mm Thick (45 Shore Hardness Only)

815-S151-P01

Silicone Rubber Sheeting (Heat Stabilising) 300mm wide (various thickness)

 

Detectamet are able to supply the following adhesive

to use with metal detectable silicone products (also available in 18kg pails and 204kg drums)

 

Type

Code

Detectamet Silicone Glue (82.8ml Tube)

 

Detectamet Silicone Glue (310ml Tube)

 

 

Detectable on line – 50 Khz – 1 Mhz – 1mm sphere FE

Detectamet recommends that all products are tested in house and under your own factory conditions.

Results may vary

 

 

Disclaimer: Detectamet recommend all products be tested in your environment to ascertain suitability. Information is supplied in good faith without warranty

Metal Detectable Silicone Rubber Sheet.

 

**NEW** Metal Detectable Rubber Sheet

Impregnated Silicone Calendered Sheet Grade.

Available in 1.5mm, 3.0mm, 6.0mm as standard ( min order 2m x 1m sheet)

Heat Stabilising Available 300mm wide only - please contact us direct for details.

 

This product contains only ingredients that are listed by the American Food & Drugs Administration (FDA) under the 21 CFR number 177-2600.

 

Typical Applications: Metal detectable seals, gaskets, joints and strips used in sensitive food, drink and pharmaceutical applications.

 

Colours

 
Blue
 
Black

Further information:

Magnet Pull Test : Test sample size = 2mm thick, 2mm x 2mm

 

Magnet Size : 20.5mm diameter, with a maximum pull of 4kg.

 

Maximum Travel Distance : = 7mm

 

Data sheets available on request

 

ENQUIRE ABOUT THIS PRODUCT

 
       

       
 
   
   
   

Copyright

Copyright © 2009 ECC Ltd    All rights reserved