|
Detectable Polyurethane Food Belt.
**NEW**
Detectathane Detectable Polyurethane Food Belt
Detectathane
is part of a new
series of film grade
polyester-based thermoplastic
polyurethanes (TPU),
specifically targeted for
extruded
profiles, film
and sheet applications, molded
parts, and other high end
extrusion
applications.
Detectathane
exhibits excellent abrasion
resistance
and toughness,
and conforms to FDA food contact
directives and has been
approved for use
by the USDA. (Equipment
Acceptance Certificate)
Technical Data
Test ASTM Typical
Physical
properties Unit Test Value
Specific Gravity
gr./cm3 D-792 1.21
Melting Point ºF
D-2117 350 - 385 °F
Hardness Shore A
D-2240 85±3 A
Taber Abrasion
Resistance / mg loss 1000
gr./H-18 D-1044 25 cycles
Mechanical
properties
Tensile Strength
(Ultimate) psi / MPa D-412 4535
psi
Tensile Stress @
100% elongation psi D-412 920
psi
Elongation at
Break % D-412 600%
Compression Set,
% 22 hrs @ 70ºF D-395 (B) 45%
E-Modulus psi /
MPa D-412 2300 psi
Tear Strength.
Die C lb/in2 D-624 535 lb./in.
Thermal
properties
Vicat Softening
Point ºF D-1525 167 °F
Regulatory
Acceptability
Conforms to FDA
food contact as described in
book 21, section 177.2600 and
177.1680, for
both wet and dry
food contact applications
respectively
USDA Equipment
Acceptance Certificate Date of
Issuance January 7,2010
All mechanical
tests conducted at 73
degrees
F unless
otherwise noted. V 2.2010
All information
supplied is supported by
research and believed to be
reliable for use as a general
guideline for material
properties
only. The values
displayed in this report are
typical values and should not to
be used for recommendation,
selection, or suitability
for any use for
this product. Magnethane assumes
no liability whatsoever in
respect to application, design
or serviceability.
*Made with a
blending of metal detectable
thermoplastic resins
*Detected by most
metal detection and X-Ray
devices used on packaging and
production lines - always test
this product on your systems
before purchasing!
* Another weapon
in the contamination battle as
Detectathane
gives you the
ability to locate pieces that
have been damaged, fallen off or
inadvertently mixed into the
product flow; pieces that may
have been missed during normal
inspection procedures now have a
good chance to be located before
reaching the finished product
*All data sheets
held and available on request
angela.musson@detectamet.com
| |
ENQUIRE ABOUT THIS PRODUCT |
 |
|
