Detectamet | Detectable Rubber Sheeting

This test was conducted in a “neutral” environment and test results will vary in different factory environments.

Property	Typical Values	Test Method
Colour	Black / Blue	RAL 5004
Hardness	67° Shore 'A'	ASTM D2240
Tensile Strength	9.0 MPa	BSISO 37
Elongation to Failure	400%	BSISO 37
Tear Strength	13.5 N/mm	BSISO 34-1 method C
Temperature Range	-60° C to 200° C

Type	Code
Detectamet Silicone Rubber Sheet Black 1.5mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)	DTMJF 0604
Detectamet Silicone Rubber Sheet Blue 1.5mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)	DTMJF 0605
Detectamet Silicone Rubber Sheet Black 3.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)	DTMJF 0606
Detectamet Silicone Rubber Sheet Blue 3.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)	DTMJF 0607
Detectamet Silicone Rubber Sheet Black 6.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)	DTMJF 0608
Detectamet Silicone Rubber Sheet Blue 6.0mm Thick Priced Per Square Metre (Minimum Order 2mtr x 1mtr Sheet)	DTMJF 0609
Silicone Rubber Sheeting 1200mm Wide 4mm Thick (45 Shore Hardness Only)	DTMJF 0602
Silicone Rubber Sheeting (Heat Stabilising) 300mm wide (various thickness)	DTMJF 0601

Detectamet are able to supply the following adhesive

to use with metal detectable silicone products (also available in 18kg pails and 204kg drums)

Type	Code
Detectamet Silicone Glue (82.8ml Tube)	DTM 0610
Detectamet Silicone Glue (310ml Tube)	DTM 0611

Detectable on line – 50 Khz – 1 Mhz – 1mm sphere FE

Detectamet recommends that all products are tested in house and under your own factory conditions.

Results may vary

Disclaimer: Detectamet recommend all products be tested in your environment to ascertain suitability. Information is supplied in good faith without warranty

Metal Detectable Silicone Rubber Sheet.

**NEW** Metal Detectable Rubber Sheet

Impregnated Silicone Calendered Sheet Grade.

Available in 1.5mm, 3.0mm, 6.0mm as standard ( min order 2m x 1m sheet)

Heat Stabilising Available 300mm wide only - please contact us direct for details.

This product contains only ingredients that are listed by the American Food & Drugs Administration (FDA) under the 21 CFR number 177-2600.

Typical Applications: Metal detectable seals, gaskets, joints and strips used in sensitive food, drink and pharmaceutical applications.

Colours

Blue

Black

Further information:

Magnet Pull Test : Test sample size = 2mm thick, 2mm x 2mm

Magnet Size : 20.5mm diameter, with a maximum pull of 4kg.

Maximum Travel Distance : = 7mm

Data sheets available on request

ENQUIRE ABOUT THIS PRODUCT